A Soft Led Display is a flexible light-emitting diode (LED) screen that combines traditional LED technology with innovative flexible materials. Unlike conventional rigid Led Displays, soft LED displays utilize flexible substrates such as polyimide or polyethylene terephthalate (PET) with a thickness typically ranging from 0.1mm to 2mm. These displays maintain excellent performance characteristics including a brightness range of 800 to 5000 nits, contrast ratios exceeding 5000:1, and wide viewing angles up to 170 degrees. The pixel pitch can be as small as P1.2mm for high-resolution applications, while maintaining a bending radius as tight as R50mm without compromising display quality.
Flexibility: Can bend to radii as small as 50mm with over 100,000 bending cycles without failure
Thickness: Ranges from 0.1mm (ultra-thin) to 2mm (standard flexible)
Brightness: 800-5000 nits (adjustable for indoor/outdoor use)
Refresh Rate: Typically 3840Hz or higher, eliminating flicker
Color Gamut: Covers ≥110% NTSC for vivid color reproduction
Power Consumption: Approximately 30-50% lower than rigid LED displays of equivalent size
Operating Temperature: Functions reliably between -30°C to 60°C
IP Rating: Typically IP65 or higher for outdoor models
Soft LED displays are revolutionizing retail environments with their ability to conform to curved surfaces. They can be installed on columns (with curvature radii as small as R75mm) or wrapped around product displays while maintaining 4K resolution at viewing distances as close as 1.5 meters. The high brightness ensures visibility even in sunlit storefronts, with 5000 nits models specifically designed for window displays.
In the automotive sector, soft LED displays are being integrated into curved dashboards with radii of R300-500mm, providing drivers with 180° viewing angles while withstanding temperature fluctuations from -40°C to 85°C. Public transportation systems utilize them for flexible route displays that can bend around bus interiors while maintaining 16-hour continuous operation at full brightness.
Architects are incorporating soft LED displays into building facades with bending capabilities up to R1000mm for large-scale installations. These displays can cover surfaces up to 100m² without visible seams, with pixel pitches ranging from P2.5mm to P10mm depending on viewing distance requirements. Their lightweight nature (≤5kg/m²) reduces structural load compared to traditional displays.
The medical field utilizes soft LED displays in wearable health monitors that can conform to body contours with bending radii of R20mm. These medical-grade displays operate at 400-600 nits for clear visibility in clinical environments while maintaining 72-hour continuous use on a single charge.
Entertainment industries employ soft LED displays for dynamic stage backdrops that can be rolled (minimum rolling diameter Ø150mm) and reconfigured between performances. High refresh rates (≥3840Hz) eliminate banding in professional video capture, while the 16-bit color processing ensures smooth gradients in lighting effects.
Proper cleaning requires using isopropyl alcohol (70% concentration) with lint-free wipes, applied with pressure not exceeding 3N/cm². For outdoor installations, a bi-weekly cleaning schedule is recommended to maintain optimal brightness, which can degrade by ≤5% annually with proper maintenance.
When not in use, soft LED displays should be stored rolled on cores with a minimum diameter of 200mm (for displays thicker than 0.5mm) in environments maintaining 25±5°C and 40-60% RH. Avoid compression exceeding 50kg/m² during storage to prevent micro-LED damage.
For outdoor installations, ensure the IP rating matches environmental requirements - IP65 for general outdoor use, IP67 for coastal areas, and IP69K for high-pressure washing environments. The display's operational temperature range should be considered, with performance guaranteed between -30°C to 50°C for standard models.
Implement power cycling with intervals not exceeding 168 continuous hours to prolong LED lifespan beyond the standard 100,000 hours. Use power conditioners maintaining voltage within ±5% of rated input to prevent driver circuit damage.
Regularly perform pixel compensation cycles (recommended every 500 hours of operation) to maintain uniform brightness across the display. This process adjusts individual pixel output to compensate for the typical ≤0.5% annual brightness variation between LEDs.
During transportation, avoid sharp bends exceeding the display's minimum bend radius (typically R50mm for dynamic bending or R30mm for one-time installation bends). Use anti-static packaging when transporting displays with pixel pitches smaller than P2mm to prevent electrostatic discharge damage.
Previous: Transparent Video Wall
Copyright © 2025 Guangdong Leiyi Optoelectronic Technology Co., Ltd All rights reserved. Privacy Policy
